![]() |
||||||||||||
Aerial Ignition Home > Fuel Gelling > Equipment > Firecon Batch Mixer > Operation Manual > Appendix B EquipmentFirecon Batch MixerBatch Mixer/Terra Torch Operation ManualAppendix B
|
FIRE-TROL® FIREGEL® FUEL GELLING AGENT |
|
---|---|
50 to 500 lb./order: (Available in 50-lb. bags.) |
$4.60/lb. |
Quantity Discount | |
550 to 1,000 lb. order: | $4.45/lb. |
1,050 lb. and over/order: (In even lots of 1,050 lb.) |
$4.25/lb. |
All Prices Are FOB normal commercial locations in 48
contiguous states and Washington, D.C.
PACKAGING
FIRE-TROL FIREGEL Fuel Gelling Agent is supplied in 50-lb. bags. For smaller orders, each bag is shipped in a cardboard container; for larger orders of 1,050 lb. (21 x 50 lb. bags), the product is shipped in a palletized cardboard container.
TYPICAL PROPERTIES
Moisture: 1.5%
Ash: 19%
Melting Point: Over 200°C
Appearance: White to Tan Powder Bulk
Density: 25-30 lb./cubic ft.
Packaging: 50 lb. (22.7 kg) bags
PRODUCT BENEFITS
- Easily dispersed.
- Relatively quick gelation rates.
- Good low temperature performance.
- Will gel a variety of hydrocarbons including gasoline, diesel and jet fuel.
- Packaged in water resistant bags to withstand field conditions.
- Over 60°F fuel temperature: Add 3-4 lb. FIRE-TROL FIREGEL Fuel Gelling Agent to 55 gallons of fuel; gelling will be rapid.
- 40°- 60°F fuel temperature: Add 4-5 lb. FIRE-TROL FIREGEL Fuel Gelling Agent to 55 gallons of fuel: wait up to 30 minutes for gelling.
- Less than 40°F fuel temperature: Add 6-7 lb. FIRE-TROL FIREGEL Fuel Gelling Agent to 55 gallons of fuel; wait over 45 minutes for gelling.
Note—Fuel should be fresh and in clean containers. Contaminated fuel will not gel well.
ENVIRONMENTAL INFORMATION
FIRE-TROL FIREGEL Fuel Gelling Agent has been shown to have minimal health and environmental effects when used correctly. For further information, please see Material Safety Data Sheet.

Back | Next
Fuel Gelling
Aerial Ignition Home