skip to main page content  Helitorch Fuel Gelling Plastic Sphere
Dispenser 		Additional
Information 		Questions &
Comments
  design graphic  
   

Aerial Ignition Home > Fuel Gelling > Equipment > Firecon Batch Mixer > Operation Manual > Exhibit B

Fuel Gelling section title

Equipment

Firecon Batch Mixer

Batch Mixer/Terra Torch Operation Manual

Back | Next
Table of Contents

Exhibit B
Firing in a Crosswind

Graphic image showing where to loosen propane torch holder. The image is labeled with the text 'Move left or right 90 degrees' showing that a loosened propane torch holder can move left for right 90 degrees. The 'Set Screw' is also labeled in the image.

To improve firing in crosswind, loosen propane torch holder so it is friction tight, or can be moved by hand, then rotate torch 90 degrees left or right so it is on the windward side of the gun tip. The method should eliminate swinging the torch gun from windward to leeward.

   
  design graphic Top

Back | Next

Fuel Gelling

Aerial Ignition Home