US Department of Agriculture, USDA Forest Service, Technology and Development Program Banner with Logos.
Images from various aspects of the T&D Program.
HomeAbout T&DT&D PubsT&D NewsProgram AreasHelpContact Us
  T&D > T&D Pubs > Riparian Restoration T&D Publications Header

Riparian Restoration

Appendix C-C: High Pressure Gasoline Powered Pump Specifications (See figures C15 and C16)

Photo of a man setting up a caged water pump.
Figure C15—Note: Metal cage around the pump and
motor was purchased separately.

Photo of a man standing by a large upright trash strainer, set up near a water pump close to a stream.
Figure C16—Boyd Simonson with large trash strainer

Specifications

  • 5-HP Gas powered High pressure pump

  • 7,200 GPH, 200-foot head, 88 psi max

  • Vertical lift 18 ft

  • Self priming pump with 2-inch NPT suction and

  • discharge ports

  • Aluminum closed impeller

  • Cast aluminum housing

  • Cast Iron volute

  • Built-in check valve

  • Water and trash pump strainer, 2 inch, included

  • 64 pounds

Note: Trash Strainer shown was built for large stream systems so it could be perched above the stream bottom and was heavy enough not to move with the stream current. The pump was shipped with a small strainer that attaches to the end of the suction hose for use on smaller stream systems (Not shown).