Privacy | Legal

Table of Contents Back | Next | Home

Missoula Technology & Development Center

DataRAM 2000 Particulate Monitor Forest Service User's Guide

DataRAM Configuration for the Telemetry Unit

Because the data will be available over the Internet and are stored indefinitely, it is not necessary to log the data. However, you may still want to log the data for backup or in case the satellite system has technical problems. If so, refer to the Logging Data section for instructions.

To ensure proper functioning of the remote satellite telemetry system, the DataRAM must be set to average data every 10 seconds. To do this from the 'MAIN MENU 1' screen, press the button beside 'Parameters'. Set 'AvgTime' to 10 seconds.

Press 'EXIT' to go back to 'MAIN MENU 1'.

Note: Logging data without the telemetry unit requires 'Every' to be set at '00:05:00'. Refer to the Logging Data section.

E-mail: wo_mtdc_webmaster@fs.fed.us

Back | Next Table of Contents

Missoula Technology & Development Center

Visitor since Jan 1, 2003