Wiring Methods, Components, and
Equipment for General Use

Flexible cords and cables [1910.305(g)]

1910.305(g)(1)(i) Flexible cords and cables shall be approved and suitable for conditions of use and location. Flexible cords and cables shall be used only for:
1910.305(g)(1)(i)(A) Pendants;
1910.305(g)(1)(i)(B) Wiring of fixtures;
1910.305(g)(1)(i)(C) Connection of portable lamps or appliances;
1910.305(g)(1)(i)(D) Elevator cables;
1910.305(g)(1)(i)(E) Wiring of cranes and hoists;

1910.305(g)(1)(i)(F) Connection of stationary equipment to facilitate their frequent interchange;
1910.305(g)(1)(i)(G) Prevention of the transmission of noise or vibration;
1910.305(g)(1)(i)(H) Appliances where the fastening means and mechanical connections are designed to permit removal for maintenance and repair; or
1910.305(g)(1)(i)(I) Data processing cables approved as a part of the data processing system.
1910.305(g)(1)(iii) Unless specifically permitted in paragraph (g)(1)(i) of this section, flexible cords and cables may not be used:
1910.305(g)(1)(iii)(A) As a substitute for the fixed wiring of a structure;
1910.305(g)(1)(iii)(B) Where running through holes in walls, ceilings, or floors;