Skip to Main Content
How to use hand-held computers to evaluate wood drying.Author(s): Howard N. Rosen; Darrell S. Martin
Source: Research Paper NC-263. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (1.88 MB)
DescriptionTechniques have been developed to evaluate end generate wood drying curves with hand-held computers (3-5K memory). Predictions of time to dry to a specific moisture content, drying rates, and other characteristics of wood drying curves can be made. The paper describes the development of programs and illustrates their use.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationRosen, Howard N.; Martin, Darrell S. 1985. How to use hand-held computers to evaluate wood drying. Research Paper NC-263. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsdrying rate, numerical analysis, models, psychrometric relationships, moisture content
- Theoretical thermal conductivity equation for uniform density wood cells
- Development of new microwave-drying and straightening technology for low-value curved timber
- Analysis of ethanol-soluble extractives in southern pine wood by low-field proton NMR
XML: View XML