Skip to Main Content
Drying hardwoods with impinging jets.Author(s): Howard N. Rosen
Source: General Technical Report NC-59. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: General Technical Report (GTR)
Station: North Central Research Station
PDF: Download Publication (1.42 MB)
DescriptionSilver maple, yellow poplar, and black walnut lumber was dried in a prototype jet dryer over a range of temperatures from 120 degrees to 400 degrees Fahrenheit and air velocities from 1,000 to 9,000 fpm. Different drying schedules were developed for each type of wood. The quality of the jet-dried lumber was good and compared favorably with kiln-dried lumber.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationRosen, Howard N. 1980. Drying hardwoods with impinging jets. General Technical Report NC-59. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordssilver maple, yellow poplar, black walnut, Liriodendron tulipifera, Acer saccharinum, Juglans nigra, degrade, high temperature, humidity
- Dimension yields from short logs of low-quality hardwood trees.
- Drying small quantities of green hardwoods at home.
- The effects of desiccation on seeds of Acer saccharinum and Aesculus pavia: recalcitrance in temperate tree seeds
XML: View XML