Skip to Main Content
Determining pH of strip-mine spoilsAuthor(s): W. A. Berg
Source: Research Note NE-98. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 7p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: View PDF (383.73 KB)
DescriptionResults with the LaMotte-Morgan method for determining soil pH-or the solution modification of this method-usually agreed fairly well with the results from using a pH meter, the recognized standard. Results obtained with the Soiltex and Hellige-Truog methods often deviated somewhat from the pH meter readings; and the Hydrion papers and the Kelway pH tester often gave results that were considerably different.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBerg, W. A. 1969. Determining pH of strip-mine spoils. Research Note NE-98. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 7p.
- The chemical composition of atmospheric precipitation from selected stations in Michigan
- Measuring light in uneven-aged hardwood stands
- Inter-laboratory variation in the chemical analysis of acidic forest soil reference samples from eastern North America
XML: View XML