Skip to Main Content
Due to a lapse in federal funding, this USDA website will not be actively updated. Once funding has been reestablished, online operations will continue.
Some variables affecting hardwood control with stem injections of 2,4,5-T.Author(s): John L. Arend
Source: Research Paper NC-18. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (3.74 MB)
DescriptionThe water-soluble amine salt was at least four times more effective than the oil-soluble ester. Concentration of the 2,4,5-T, spacing of the injections, and season of the year were also important; height of the spaced injections was not. The effects of these variables and of crown size and character of the branching on hardwood control with 2,4,5-T injections are discussed.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationArend, John L. 1967. Some variables affecting hardwood control with stem injections of 2,4,5-T. Research Paper NC-18. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsstem injections, hardwood control, 2, 4, 5-T
- Chemical control of hardwoods on pine sites of Maryland's eastern shore
- Killing Bottomland Culls
- Controlling Hazel, Aspen Suckers, and Mountain Maple with Picloram
XML: View XML