Skip to Main Content
Crosscut shearing of roundwood bolts.Author(s): Rodger A. Arola
Source: Research Paper NC-68. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (4.81 MB)
DescriptionDiscusses results of study on crosscut shearing of aspen, basswood, spruce, hard maple, and yellow birch with numerous shear blade and anvil designs. Also includes effect of temperature, coated shear blades, dulling, wood properties, and very thin shear blades on force and splitting damage.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationArola, Rodger A. 1971. Crosscut shearing of roundwood bolts. Research Paper NC-68. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsblades, anvils, dulling, wood properties, temperature, coatings
- Seed fall in an oldgrowth northern hardwood forest
- Root-Crown Relations of Young Sugar Maple and Yellow Birch
- Dynamics in late-successional hemlock-hardwood forests over three decades
XML: View XML