Skip to Main Content
The changing market for hardwood plywood stock panels.Author(s): Gary R. Lindell
Source: Research Paper NC-78. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (2.73 MB)
DescriptionThe major end product for hardwood plywood (usually birch) stock panels in 1970 was kitchen cabinets. About 1/3 of the volume was shipped to the Pacific region. Over 1/3 of the responses by wholesalers indicated that stock panel sales had declined over the preceding 3 years, chiefly because of the inroads being made by plastic covered particleboard panels. The outlook is for increased market acceptance of plastic overlaid panels resulting in declining stock panel sales.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationLindell, Gary R. 1972. The changing market for hardwood plywood stock panels. Research Paper NC-78. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsbirch plywood, particleboard, plastics, kitchen cabinets
- OSB as substrate for engineered wood flooring
- Edge-glued panels from Alaska hardwoods: retail manager perspectives
- Consumer and manufacturer perceptions of hardwood panels made from character-marked lumber
XML: View XML