Skip to Main Content
Fifteen-year results from six cutting methods in second-growth northern hardwoods.Author(s): Gayne G. Erdmann; Robert R. Oberg
Source: Research Paper NC-100. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (1.91 MB)
DescriptionPresents and compares stand growth and yield information from three single-tree selection cuts, a crop-tree release treatment, an 8-inch diameter limit cut, and an uncut control. Discusses the influence of stand density on basal area growth, cubic volume growth, and board-foot volume growth.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationErdmann, Gayne G.; Oberg, Robert R. 1973. Fifteen-year results from six cutting methods in second-growth northern hardwoods. Research Paper NC-100. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsbasal area growth, cubic volume growth, board foot growth, yield, basal area stocking, stand structure
- Cutting a young-growth, mixed-conifer stand to California Forest Practice Act Standards
- Stripcut-thinning of ponderosa pine stands: An Arizona case study
- Growth of lodgepole pine stands and its relation to mountain pine beetle susceptibility
XML: View XML