Skip to Main Content
Solving wood chip transport problems with computer simulation.Author(s): Dennis P. Bradley; Sharon A. Winsauer
Source: Research Paper NC-138. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (1.15 MB)
DescriptionEfficient chip transport operations are difficult to achieve due to frequent and often unpredictable changes in distance to market, chipping rate, time spent at the mill, and equipment costs. This paper describes a computer simulation model that allows a logger to design an efficient transport system in response to these changing factors.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBradley, Dennis P.; Winsauer, Sharon A. 1976. Solving wood chip transport problems with computer simulation. Research Paper NC-138. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordschipping, trucking, optimization
- Trucking Characteristics for an In-woods Biomass Chipping Operation
- Whole tree transportation system for timber processing depots
- Short rotation forestry harvesting - systems and costs
XML: View XML