Skip to Main Content
The cost of debarked whole-tree chips: stump to digestor.Author(s): Frank E. Biltonen; James A. Mattson; Edsel D. Matson
Source: Research Paper NC-174. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
PDF: View PDF (1.34 MB)
DescriptionA cost analysis of a 60 green ton per hour chip debarking plant predicts a processing cost of $7.58 per dry output ton, exclusive of raw materials costs.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBiltonen, Frank E.; Mattson, James A.; Matson, Edsel D. 1979. The cost of debarked whole-tree chips: stump to digestor. Research Paper NC-174. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsharvesting, chipping, economics, bark barking, wood fuel, pulping whole-tree utilization, energy
- Chipping of thinning slash on fuel-breaks
- Comparison of four harvesting systems in a loblolly pine plantation
- Cost of and soil loss on "minimum-standard" forest truck roads constructed in the central Appalachians
XML: View XML