Skip to Main Content
Reducing particle dimensions of chunkwood.Author(s): Robert C. Radcliffe
Source: Research Paper NC-296. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Paper (RP)
Station: North Central Research Station
View PDF (3.19 MB)
DescriptionPresents and compares the chunkwood sizes obtainable with the USDA Forest Service prototype wood chunker using four different blade configurations, and the results of further chunkwood reduction with three methods totally separate from the chunking process.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationRadcliffe, Robert C. 1990. Reducing particle dimensions of chunkwood. Research Paper NC-296. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsflakeboard, chunkwood particle size, size reduction, comminution, fingerlings
- Chunkwood: Production, characterization, and utilization.
- Air Drying of Chunkwood and Chips
- Teardrop chunker performance.
XML: View XML