Skip to Main Content
Bark Separation During Chipping With a Parallel Knife ChipperAuthor(s): John R. Erickson
Source: Research Note NC-54. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Note (RN)
Station: North Central Research Station
PDF: View PDF (614.55 KB)
DescriptionFive winter-cut northern species were chipped in a frozen and unfrozen condition with a parallel knife chipper. The degree of bark separation during chipping and a relative gradation of chip size are reported.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationErickson, John R. 1968. Bark Separation During Chipping With a Parallel Knife Chipper. Research Note NC-54. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
KeywordsBark, parallel knife chipper.
- Compression Debarking of Stored Wood Chips
- Should whole-tree chips for fuel be dried before storage?
- Doit-On Secher Avant Stockage Les Plaquettes D`Arbres Entiers Destinees Au Chauffage
XML: View XML