Skip to Main Content
Processing hardwood bark residues by screeningAuthor(s): David M. Emanuel
Source: Research Note NE-260. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3 p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: View PDF (386.76 KB)
DescriptionMost of the hardwood bark residues removed by floating-cutterhead or rosserhead debarkers can be processed into acceptable bark products by screening alone. And by prescreening bark residues, operators of bark processing plants can use smaller hammermills than otherwise are required, thus lowering investment and energy costs.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationEmanuel, David M. 1978. Processing hardwood bark residues by screening. Research Note NE-260. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3 p.
- Defect detection on hardwood logs using high resolution three-dimensional laser scan data
- The Mobile Bark Blower: An Evaluation of Performance and Costs
- Fractionation of Forest Residues of Douglas-fir for Fermentable Sugar Production by SPORL Pretreatment
XML: View XML