Skip to Main Content
How to Determine Polyetheylene Glycol 1,000 Content in Treated WoodAuthor(s): Howard N. Rosen
Source: Research Note NC-191. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Note (RN)
Station: North Central Research Station
PDF: View PDF (806.36 KB)
DescriptionAn experimental technique using water extraction for evaluation of the content of ployethylene glycol of molecular weight 1,000 in wood where the ovendry weight of the untreated wood is not available was shown to be applicable for PEG-treated black oak and yellow-poplar.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationRosen, Howard N. 1975. How to Determine Polyetheylene Glycol 1,000 Content in Treated Wood. Research Note NC-191. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordsextraction, resin, Liriodendron tulipifera, Quercus velutina
- Potential sources of variation that influence the final moisture content of kiln-dried hardwood lumber
- Volume, Weight, and Pulping Properties Of 5-Year-OId Hardwoods
- Weight, volume, and physical properties of major hardwood species in the Southern Appalachian mountains
XML: View XML