Skip to Main Content
Knife Planing Across the Grain Can be Applied to HardwoodsAuthor(s): Harold A. Stewart
Source: Research Note NC-196. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Note (RN)
Station: North Central Research Station
PDF: Download Publication (1.57 MB)
DescriptionShows that knife planing across the grain can be applied to most domestic hardwood species to produce a satisfactory finish knife-planed surface and flakes for particleboard.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationStewart, Harold A. 1975. Knife Planing Across the Grain Can be Applied to Hardwoods. Research Note NC-196. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Keywordswood machining, surface quality
- Cross-Grain Knife Planing Improves Surface Quality and Utilization of Aspen
- Tool Forces and Chip Formation In Orthogonal Cutting Of Loblolly Pine
- Force and work to shear green southern pine logs at slow speed
XML: View XML