Skip to Main Content
Effects of Stock Removal Rates on Belt Loading for Abrasive Planing HardwoodsAuthor(s): Harold A. Stewart
Source: Research Note NC-240. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
Publication Series: Research Note (RN)
Station: North Central Research Station
PDF: View PDF (1015.11 KB)
DescriptionBelt loading increases up to a point and then decreases as stock removal rate increases for red oak and yellow-poplar
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationStewart, Harold A. 1978. Effects of Stock Removal Rates on Belt Loading for Abrasive Planing Hardwoods. Research Note NC-240. St. Paul, MN: U.S. Dept. of Agriculture, Forest Service, North Central Forest Experiment Station
KeywordsMachining, sanding, surfacing, tool life
- Fertilization Increases Growth of Sawlog-Size Yellow-Poplar and Red Oak in West Virginia
- Oak regeneration following complete and partial harvesting in the Mississippi Bluff Hills: preliminary results
- Effects of uneven-aged and diameter-limit management on West Virginia tree and wood quality
XML: View XML