Skip to Main Content
How to determine seasoning degrade losses in sawmill lumberyardsAuthor(s): Donald G. Cuppett
Source: Research Note NE-32. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 1-7
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: View PDF (271.52 KB)
DescriptionSawmill operators generally recognize the problem of defects due to air-drying hardwood lumber, but they often fail to realize how much these seasoning losses cost in money, time, and wasted lumber.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationCuppett, Donald G. 1965. How to determine seasoning degrade losses in sawmill lumberyards. Research Note NE-32. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 1-7
- Crook and overlength in hardwood lumber:results from a 14-mill survey
- Simplified Guidelines to Hardwood Lumber Grading
- Durability of structural lumber products after exposure at 82°C and 80% relative humidity
XML: View XML