Skip to Main Content
Converting Virginia pine stump diameters to diameters breast highAuthor(s): Thomas W., Jr. Church
Source: Forest Research Note NE-23. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 2p.
Publication Series: Forest Research Note
Station: Northeastern Research Station
PDF: Download Publication (123.73 KB)
DescriptionUp until the last decade, practically no forest-management work had been done in stands of Virginia pine (Pinus virginiana Miller). It is still common practice to clear-cut the stand - with no consideration for a future crop. In some places this has resulted in satisfactory establishment of another pine stand. But usually hardwoods take over the site after two such cuttings.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationChurch, Thomas W., Jr. 1953. Converting Virginia pine stump diameters to diameters breast high. Forest Research Note NE-23. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 2p.
- Effect of seedbed condition on regeneration of Virginia pine after logging
- Regenerating the last strips in strip-cuttings in Virginia pine
- A volume table for Virginia pine in Prince Georges County, Maryland
XML: View XML