Skip to Main Content
Relationship of stump diameter to d.b.h. for white pine in the northeastAuthor(s): Jesse D. Diller
Source: Forest Research Note NE-38. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 2p.
Publication Series: Forest Research Note
Station: Northeastern Research Station
PDF: View PDF (144.55 KB)
DescriptionA need to estimate the volume cut from a timber tract when only the stumps are left is often felt by foresters, timber operators, and landowners. This need arises in areas where timber sales are based on stump diameters, in timber trespass cases, in check cruises on marked timber sales (to determine volume cut from unmarked trees), and as an aid in piecing together the history of cutover lands as a step in forest-management work.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
Citationnull 1954. Relationship of stump diameter to d.b.h. for white pine in the northeast. Forest Research Note NE-38. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 2p.
- Converting hardwoods on poor sites to white pine by planting and direct seeding
- Determining fire history from old white pine stumps in an oak-pine forest
- The white pine - hemlock forests of the anthracite region
XML: View XML