Skip to Main Content
Converting factors for stacked woodAuthor(s): C. A. Bickford
Source: Forest Research Note NE-69. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3p.
Publication Series: Forest Research Note
Station: Northeastern Research Station
PDF: View PDF (134.18 KB)
DescriptionThough the "cord" is used as a standard unit of measure for stacked wood, there is much confusion as to what a cord is and how it can be properly converted to other units of measure. The amount of solid wood in a pile varies greatly depending on the size, straightness, and evenness of the material in the pile, and also on the closeness of stacking.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationBickford, C. A. 1957. Converting factors for stacked wood. Forest Research Note NE-69. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3p.
- Converting factors for stacked wood
- Wood content of stacked 4-foot round pulpwood in Connecticut
- Biomass production on the Olympic and Kitsap Peninsulas, Washington: updated logging residue ratios, slash pile volume-to-weight ratios, and supply curves for selected locations
XML: View XML