Skip to Main Content
Three diameter-limit cuttings in West Virginia hardwoods a 5-year reportAuthor(s): Russell J. Hutnik
Source: Station Paper NE-106. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 1-13
Publication Series: Science Perspectives (SP)
Station: Northeastern Research Station
PDF: View PDF (1.6 MB)
DescriptionMine timbers are a basic need of West Virginia's giant coal industry. The annual requirement of sawed mine timbers is roughly 250 million board feet. The mines also use a large volume of wood in rough form for props and lagging. Yet, compared to sawlogs and veneer logs, these mine timbers are low-value products. This means that they must be produced at low cost.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHutnik, Russell J. 1958. Three diameter-limit cuttings in West Virginia hardwoods a 5-year report. Station Paper NE-106. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 1-13
- An economic analysis of mine-timber marketing in West Virginia
- Development of minimum standards for hardwoods used in producing underground coal mine timbers
- Logging Residue Available for Mine-Timber Production
XML: View XML