Skip to Main Content
Due to a lapse in federal funding, this USDA website will not be actively updated. Once funding has been reestablished, online operations will continue.
Manufacture of industrial products from oakAuthor(s): Hugh W. Reynolds
Source: In: Oak Symposium Proceedings. 1971 August 16-20; U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station: Upper Darby, PA. 103-105.
Publication Series: Other
Station: Northern Research Station
PDF: View PDF (349.03 KB)
DescriptionThe three largest and fastest growing markets for oak are railroad crossties, reusable pallets, and truck and container flooring. Manufacturers of oak lumber are advised to keep these products in mind when planning their production.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationReynolds, Hugh W. 1971. Manufacture of industrial products from oak. In: Oak Symposium Proceedings. 1971 August 16-20; U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station: Upper Darby, PA. 103-105.
- Acquisition of Ophiostoma quercus and Ceratocystis fagacearum by nitidulids from O. quercus-colonized oak wilt mats
- Oak wilt and oak decline in the upper midwest USA
- Previously unrecorded damage to oak, Quercus spp., in southern California by the goldspotted oak borer, Agrilus coxalis Waterhouse (Coleoptera: Buprestidae)
XML: View XML