Skip to Main Content
Inventorying recreation useAuthor(s): George A. James
Source: In: Larson, E.vH., ed. The Forest Recreation Symposium. State University of New York College of Forestry; 1971 October 12-14: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 78-95.
Publication Series: Other
Station: Northern Research Station
PDF: Download Publication (2.99 MB)
DescriptionPart I is a general discussion about the estimation of recreation use, with descriptions of selected sampling techniques for estimating recreation use on a wide variety of different sites and areas. Part II is a brief discussion of an operational computer oriented information system designed and developed by the USDA Forest Service to fully utilize the inventories of recreation information available from over 21,000 recreation elements (sites and areas) of the National Forest System.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJames, George A. 1971. Inventorying recreation use. In: Larson, E.vH., ed. The Forest Recreation Symposium. State University of New York College of Forestry; 1971 October 12-14: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 78-95.
- Using social media as data to better understand recreation on public lands
- The effectiveness of visitation proxy variables in improving recreation use estimates for the USDA Forest Service
- Area-specific recreation use estimation using the national visitor use monitoring program data.
XML: View XML