Skip to Main Content
Logging Residue Available for Mine-Timber ProductionAuthor(s): Floyd G. Timson
Source: Res. Pap. NE-415. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (1.2 MB)
DescriptionHardwood logging residue was examined as a source of raw material in the manufacture of sawn, split, and round timbers for use in underground coal mines. Forty-four percent of the total logging residue (residue !U 4 inches in diameter outside bark (dob), small end, and 4 feet long) from sawlog-only harvests was suitable for mine-timber production. Only 26 percent of the limbwood residue was suitable for mine timbers, but 58 percent of the bolewood residue was suitable. Depending on the species, the suitability for bolewood ranged from less than 40 percent (beech and basswood) to 68 percent (cucumbertree).
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationTimson, Floyd G. 1978. Logging Residue Available for Mine-Timber Production. Res. Pap. NE-415. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
- The quality and availability of hardwood logging residue based on developed quality levels
- Species composition changes under individual tree selection cutting in cove hardwoods
- Vegetation of loess bluff ravines in the Jackson Purchase Region of Kentucky
XML: View XML