Skip to Main Content
A comparison of height growth and leaf parameters of hybrid poplar cuttings grown in ozone-fumigated atmospheresAuthor(s): Keith F. Jensen
Source: Res. Pap. NE-446. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: Download Publication (394.18 KB)
DescriptionHybrid poplar cuttings were fumigated with an ozone dosage of 15 ppm-hours. One treatment was a steady fumigation at 0.2 ppm while the second fumigation fluctuated between 0.1 and 0.3 ppm. No significant differences were found in cutting height, leaf area, leaf width, and leaf dry weight, but significant differences were found in chlorophyll content and carbohydrate content.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationJensen, Keith F. 1979. A comparison of height growth and leaf parameters of hybrid poplar cuttings grown in ozone-fumigated atmospheres. Res. Pap. NE-446. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 3p.
- Sulfur content of hybrid poplar cuttings fumigated with sulfur dioxide
- Air pollutants affect the relative growth rate of hardwood seedlings
- Effects of simulated acid rain, ozone and sulfur dioxide on suitability of elms for elm leaf beetle
XML: View XML