Skip to Main Content
Taper and volume equations for selected Appalachian hardwood speciesAuthor(s): A. Jeff Martin
Source: Res. Pap. NE-490. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 22p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: Download Publication (2.23 MB)
DescriptionCoefficients for five taper/volume models are developed for 18 Appalachian hardwood species. Each model can be used to estimate diameter at any point on the bole, height to any preselected diameter, and cubic-foot volume between any two points on the bole. The resulting equations were tested on six sets of independent data and an evaluation of these tests is included, A wide variety of volume tables can be constructed with the models; some examples are given.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationMartin, A. Jeff. 1981. Taper and volume equations for selected Appalachian hardwood species. Res. Pap. NE-490. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 22p.
KeywordsTaper, tree volume, hardwoods
- Nuttall Oak Volume and Weight Tables
- Taper equation and volume tables for plantation-grown red alder.
- Pinevol: a user's guide to a volume calculator for southern pines
XML: View XML