Skip to Main Content
Live-sawing: a way to increase lumber grade yield and mill profitsAuthor(s): Neil K. Huyler
Source: Res. Pap. NE-305. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 9p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: Download Publication (815.38 KB)
DescriptionA study to compare live-sawing with conventional grade-sawing of factory-grade 3 red oak sawlogs revealed that live-sawing results in substantial increases in production rate, overrun, log value per thousand board feet, and significant reduction in size of the breakeven log diameter.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHuyler, Neil K. 1974. Live-sawing: a way to increase lumber grade yield and mill profits. Res. Pap. NE-305. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 9p.
- Dimension Yields from Factory Grade 2 and 3 Red Oak Logs
- Design and Evaluation of Log-To-Dimension Manufacturing Systems Using System Simulation
- The Value Versus Volume Yield Problem for Live-Sawn Hardwood Sawlogs
XML: View XML