Skip to Main Content
Users Guide for Fire Image Analysis System - Version 5.0: A Tool for Measuring Fire Behavior CharacteristicsAuthor(s): Carl W. Adkins
Source: Gen. Tech. Rep. SE-93. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southeastern Forest Experiment Station. 15 p.
Publication Series: General Technical Report (GTR)
Station: Southeastern Forest Experiment Station
View PDF (1.1 MB)
DescriptionThe Fire Image Analysis System is a tool for quantifying flame geometry and relative position at selected points along a spreading line fire. At present, the system requires uniform terrain (constant slope). The system has been used in field and laboratory studies for determining flame length, depth, cross sectional area, and rate of spread.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationAdkins, Carl W. 1995. Users Guide for Fire Image Analysis System - Version 5.0: A Tool for Measuring Fire Behavior Characteristics. Gen. Tech. Rep. SE-93. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southeastern Forest Experiment Station. 15 p.
KeywordsFlame length, quantifying flame geometry, rate of spread
- Characterization of flame radiosity in shrubland fires
- Effects of wind velocity and slope on fire behavior
- Nomographs for estimating surface fire behavior characteristics
XML: View XML