Skip to Main Content
Future Automated Rough Mills Hinge on Vision SystemsAuthor(s): Philip A. Araman
Source: Wood Digest. 27(9): 35-36.
Publication Series: Miscellaneous Publication
PDF: View PDF (84 KB)
DescriptionThe backbone behind major changes to present and future rough mills in dimension, furniture, cabinet or millwork facilities will be computer vision systems. Because of the wide variety of products and the quality of parts produced, the scanning systems and rough mills will vary greatly. The scanners will vary in type. For many complicated applications, multiple scanner types will be used. This article describes how scanning systems will be incorporated and how they will change current rough mill operations.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationAraman, Philip A. 1996. Future Automated Rough Mills Hinge on Vision Systems. Wood Digest. 27(9): 35-36.
- Preliminary Full-Scale Tests of the Center for Automated Processing of Hardwoods' Auto-Image
- The economic potential of CT scanners for hardwood sawmills
- Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System
XML: View XML