Skip to Main Content
Due to a lapse in federal funding, this USDA website will not be actively updated. Once funding has been reestablished, online operations will continue.
Mor-Bell Logger: Skidding Case StudyAuthor(s): Bryce J. Stokes; Jerry L. Koger; Frank J. Pickle
Source: Res. Note SO-290. New Orleans, LA: U.S. Department of Agriculture, Forest Service, Southern Forest Experiment Station. 4 p.
Publication Series: Research Note (RN)
Station: Southern Forest Experiment Station
View PDF (144 KB)
DescriptionA production equation was developed for the Mor-Bell logger for skidding while thinning a loblolly pine plantation. Production and costs for skidding and iron gate delimbing were determined for a range of operating conditions.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationStokes, Bryce J.; Koger, Jerry L.; Pickle, Frank J. 1983. Mor-Bell Logger: Skidding Case Study. Res. Note SO-290. New Orleans, LA: U.S. Department of Agriculture, Forest Service, Southern Forest Experiment Station. 4 p.
KeywordsPlantation, thinning, production rates, costs
- Productivity and cost estimators for conventional ground-based skidding on steep terrain using preplanned skid roads
- The effect of timber harvesting guidelines on felling and skidding productivity in northern Minnesota
- Recovery of residue tops in selectively cut northern hardwood stands.
XML: View XML