Skip to Main Content
Due to a lapse in federal funding, this USDA website will not be actively updated. Once funding has been reestablished, online operations will continue.
Lamination of Hardwood Composite Framing With an Emulsion Polymer-lsocyanate Adhesive and Radio-Frequency CuringAuthor(s): Charles B. Vick
Source: Res. Pap. SE-262. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southeastern Forest Experiment Station. 15 p.
Publication Series: Research Paper (RP)
Station: Southeastern Forest Experiment Station
View PDF (1.7 MB)
DescriptionComposite framing msde from yellow-poplar and sweetgum parallel-laminated veneer and oriented flakeboard was effectively laminated with an emulsion polymer/isocyanate adhesive and radio-frequency curing at an assumed but typical range of material surface characteristics and factory assembly conditions.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationVick, Charles B. 1987. Lamination of Hardwood Composite Framing With an Emulsion Polymer-lsocyanate Adhesive and Radio-Frequency Curing. Res. Pap. SE-262. Asheville, NC: U.S. Department of Agriculture, Forest Service, Southeastern Forest Experiment Station. 15 p.
KeywordsYellow-poplar, sweetgum, parallel-laminated veneer, oriented flakeboard, shear strength, uood failure, resistance to delamination
- Durability of yellow-poplar and sweetgum and service life of finishes after long-term exposure
- Evaluation of veneer yields and grades from yellow-poplar, white oak, and sweetgum from the southeast
- Soil Management in Hardwood Plantations
XML: View XML