Skip to Main Content
Influence of Resin Duct Size and Number on Oleoresin Flow in the Southern PinesAuthor(s): John D. Hodges; William W. Elam; Donald R. Bluhm
Source: Res. Note SO-266. New Orleans, LA: U.S. Department of Agriculture, Forest Service, Southern Forest Experiment Station. 3 p.
Publication Series: Research Note (RN)
Station: Southern Forest Experiment Station
View PDF (47 KB)
DescriptionThe number of radial resin ducts was significantly higher in slash pines than in loblolly, longleaf, or shortleaf. Average width of resin ducts was less in shortleaf than in the other three species. Flow rate of oleoresin was not correlated with size or number of resin ducts for any of the four species.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHodges, John D.; Elam, William W.; Bluhm, Donald R. 1981. Influence of Resin Duct Size and Number on Oleoresin Flow in the Southern Pines. Res. Note SO-266. New Orleans, LA: U.S. Department of Agriculture, Forest Service, Southern Forest Experiment Station. 3 p.
KeywordsPinus echinata, Pinus elliottii, Pinus palustris, Pinus taeda, Dendroctonus frontalis
- A Guide to Southern Pine Seed Sources
- Southern yellow pine
- Southern pines : loblolly pine (Pinus taeda L.), longleaf pine (Pinus palustris Mill.), shortleaf pine (Pinus echinata Mill.), slash pine (Pinus elliottii Engelm.)
XML: View XML