Skip to Main Content
A simple and inexpensive pulsing device for data-recording camerasAuthor(s): David L. Sonderman
Source: Research Note NE-183. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 4p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: View PDF (320.25 KB)
DescriptionIn some areas of forestry and wood utilization research, use of automatic data recording equipment has become commonplace. This research note describes the basic electronic components needed to modify an existing intervalometer into a simplified pulsing device for controlling an automatic data recording camera. The pulsing device is easily assembled and inexpensive, when compared to similar proprietary units.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSonderman, David L. 1973. A simple and inexpensive pulsing device for data-recording cameras. Research Note NE-183. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 4p.
- How to make a wind-movement recorder from any spare drum-type recorder
- A Computer Vision System forLocating and Identifying Internal Log Defects Using CT Imagery
- A Machine Vision System for Automatically Grading Hardwood Lumber - (Industrial Metrology)
XML: View XML