Skip to Main Content
Sap volume flow as influenced by tubing diameter and slope percentAuthor(s): H. Clay Smith
Source: Research Note NE-137. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: Download Publication (427.3 KB)
DescriptionThe amount of sugar maple sap that can move through plastic tubing is controlled by several factors. The most important are tubing diameter and slope percent. Estimates are given of the number of tapholes that can be used with combinations of these variables.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationSmith, H. Clay. 1971. Sap volume flow as influenced by tubing diameter and slope percent. Research Note NE-137. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
- Health of eastern North American sugar maple forests and factors affecting decline
- Widespread sugar maple decline and regeneration failure in the Adirondacks
- Dynamics of the sugar maple component of a white oak-yellow-poplar community
XML: View XML