Skip to Main Content
Physical suitability of Appalachian hardwood sawlogs for sawed timbersAuthor(s): Lawrence D. Garrett
Source: Research Note NE-121. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: View PDF (228.67 KB)
DescriptionA study of the physical suitability of Appalachian hardwood sawlogs for manufacture of sawed timbers revealed that: most grade 1 logs can be used to saw timbers as large as 8 by 9 inches, end dimension; most grade 2 logs are suited for manufacture of timbers 6 by 8 inches and smaller; and most grade 3 logs are suited for manufacture of timbers 5 by 7 inches and smaller.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationGarrett, Lawrence D. 1970. Physical suitability of Appalachian hardwood sawlogs for sawed timbers. Research Note NE-121. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 6p.
- 62 percent of pine lumbar is cut from 10-inch or smaller logs in the Central Piedmont of South Carolina
- Stem Cubic-Foot Volume Tabies for Tree Species in the Delta Area
- Lumber yield from sitka spruce in southeastern Alaska.
XML: View XML