Skip to Main Content
Rough-Part Sizes Needed from Lumber for Manufacturing Furniture and Kitchen CabinetsAuthor(s): Philip A. Araman
Source: FS Research Paper NE-503. 8 pp.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (576.69 KB)
DescriptionThis report summarizes the results from a recent survey of the rough-part sizes needed from lumber for manufacturing furniture and kitchen cabinets. Twenty furniture and twelve cabinet companies participated in the survey. Lumber thicknesses needed and rough-part qualities desired are presented along with distributions describing the required rough-part dimensions.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationAraman, Philip A. 1982. Rough-Part Sizes Needed from Lumber for Manufacturing Furniture and Kitchen Cabinets. FS Research Paper NE-503. 8 pp.
- Meeting the Solid Wood Needs of the Furniture and Cabinet Industries: Standard-Size Hardwood Blanks
- Standard-Size Blanks for Furniture and Cabinets
- Short Lumber: Concept and Acceptance
XML: View XML