Skip to Main Content
Sawmill simulation: concepts and computer useAuthor(s): Hugh W. Reynolds; Charles J. Gatchell
Source: Research Note NE-100. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 5p.
Publication Series: Research Note (RN)
Station: Northeastern Research Station
PDF: Download Publication (202.95 KB)
DescriptionProduct specifications were fed into a computer so that the yield of products from the same sample of logs could be determined for simulated sawing methods. Since different sawing patterns were tested on the same sample, variation among log samples was eliminated; hence, the statistical conclusions are very precise.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationReynolds, Hugh W.; Gatchell, Charles J. 1969. Sawmill simulation: concepts and computer use. Research Note NE-100. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 5p.
- Sawmill simulation: data instructions and computer programs
- Sawing SHOLO logs: three methods
- Mississippi's timber industry - an assessment of timber product output and use, 1999
XML: View XML