Skip to Main Content
Evaluating the warping of laminated particleboard panelsAuthor(s): Zhiyong Cai
Source: 7th Pacific Rim Bio-Based Composites Symposium : proceedings, volume II, Nanjing, China, October 31-November 2, 2004. [S.l. : s.n.], 2004: Pages 69-79.
Publication Series: Miscellaneous Publication
PDF: Download Publication (1.0 MB)
DescriptionLaminated wood composites have been used widely in the secondary manufacturing processes in the wood panel industries. Warping, which is defined as the out-of-plane deformation of an initially flat panel, is a longstanding problem associated with the use of laminated wood composites. The mechanism of warping is still not fully understood. A new two- dimensional warping model based on mechanics of layered composites was introduced to simulate the warping behavior of laminated wood composites. Actual warping performances of veneered particleboard panels under different relative humidity environments were tested and compared with the predicted warping performances based on the two-dimensional warping model. The result indicted that the new warping model could be used to simulate the warping behavior of layered wood-based composites.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationCai, Zhiyong. 2004. Evaluating the warping of laminated particleboard panels. 7th Pacific Rim Bio-Based Composites Symposium : proceedings, volume II, Nanjing, China, October 31-November 2, 2004. [S.l. : s.n.], 2004: Pages 69-79.
KeywordsLaminated, warping, wood composite, layered, simulation
- Predicting bending stiffness of randomly oriented hybrid panels
- Orthogonal model and experimental data for analyzing wood-fiber-based tri-axial ribbed structural panels in bending
- Wood-adhesive bonding failure : modeling and simulation
XML: View XML