Skip to Main Content
62 percent of pine lumbar is cut from 10-inch or smaller logs in the Central Piedmont of South CarolinaAuthor(s): William H.B. Haines
Source: USDA Forest Service, Southeastern Forest Experiment Station, Research Notes, No. 36
Publication Series: Miscellaneous Publication
Station: Southeastern Forest Experiment Station
PDF: View PDF (128 KB)
DescriptionPine logs as small as 5 inches in diameter inside bark and trees 6 inches in diameter breast high are utilized for saw timber in the South Carolina Piedmont. More lumber is sawed from 8-inch logs than from any other size, while 12- and 14-inch trees provide nearly 50 percent of the board-foot volume cut. The bar graphs are based on measurements of 1,029 logs at 25 sawmills and 412 trees cut on 21 tracts.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHaines, William H.B. 1953. 62 percent of pine lumbar is cut from 10-inch or smaller logs in the Central Piedmont of South Carolina. USDA Forest Service, Southeastern Forest Experiment Station, Research Notes, No. 36
- AUTOSAW simulations of lumber recovery for small-diameter Douglas-fir and ponderosa pine from southwestern Oregon.
- Thinning ponderosa pine in the Pacific Northwest: a summary of present information.
- The influence of partial cutting on mountain pine beetle-caused tree mortality in Black Hills ponderosa pine stands
XML: View XML