Skip to Main Content
Industrial trials of low-expansivity sawbladesAuthor(s): Jeanne D. Danielson; Frank J. Worzala
Source: Proceedings of 10th International wood machining seminar; 1991 October 21-23; Berkeley, CA. Berkeley, CA: University of California, : Pages 202-209
Publication Series: Miscellaneous Publication
PDF: Download Publication (48 KB)
DescriptionLow-expansivity alloys have the potential to reduce thermal instability of sawblades during the sawing operation. In preliminary industrial trials of sawblades made of low-expansivity alloy, sawing accuracy was improved 22 to 38 percent during normal sawing. When saws made of a low-expansivity alloy were operated with a large temperature gradient across the blade, sawing accuracy was comparable to that of steel saws operated with little temperature gradient.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationDanielson, Jeanne D.; Worzala, Frank J. 1992. Industrial trials of low-expansivity sawblades. Proceedings of 10th International wood machining seminar; 1991 October 21-23; Berkeley, CA. Berkeley, CA: University of California, : Pages 202-209
KeywordsSawblades, expansivity, thermal instability
- ECHO: Machine feasibility program
- Temperature variations and spark generations from rock contact in hot saws
- An Analysis of the Differences among Log Scaling Methods and Actual Log Volume
XML: View XML