Skip to Main Content
How to make a laminated diving boardAuthor(s): U.S. Dept. of Agriculture. Forest Service. Forest Products Laboratory.
Source: Research Note FPL-RN-88. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 3 pages
Publication Series: Research Note (RN)
Station: Forest Products Laboratory
PDF: View PDF (54 KB)
DescriptionThe Forest Products Laboratory has developed a laminated diving board that has shown excellent performance characteristics. This board has given long, economical service under the severe moisture hazards and heavy service conditions such as found at public swimming places. The adhesive used is of the fully waterproof synthetic-resin type, which requires no protection from moisture. The board is made from narrow strips of seasoned lumber and is fully equivalent to the premium-quality one-piece boards made from selected wide and thick stock.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationU.S. Dept. of Agriculture. Forest Service. Forest Products Laboratory. 1965. How to make a laminated diving board. Research Note FPL-RN-88. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 3 pages
KeywordsDiving boards, laminated diving boards
- Portable apparatus for surface evaluation of furniture panels
- Fire resistance of engineered wood rim board products.
- Two-dimensional finite element heat transfer model of softwood. Part III, Effect of moisture content on thermal conductivity
XML: View XML