Skip to Main Content
Establishing conservation buffers using precision informationAuthor(s): Mike G. Dosskey; Dean E. Eisenhauer; Matthew J. Helmers
Source: Journal of Soil and Water Conservation, Volume 60 Number 6: 349-354
Publication Series: Miscellaneous Publication
PDF: View PDF (146 KB)
Related Research Highlights
Location, Location, Location! Putting Buffers in Their Place
DescriptionConservation buffers, such as filter strips and riparian forest buffers, are widely prescribed to improve and protect water quality in agricultural landscapes. These buffers intercept field runoff and retain some of its pollutant load before it reaches a waterway. A buffer typically is designed to have uniform width along a field margin and to intercept runoff that flows uniformly to it. However, spatial analysis of field conditions and runoff patterns indicate that more runoff is likely to flow to some locations along a field margin than to others which can substantially limit a buffer’s effectiveness. We propose that precision conservation, the use of precision spatial information, technologies, and procedures to implement conservation practices, can be used to improve the design of buffers and ensure their effectiveness. Precision conservation can integrate detailed landscape data with mathematical models in a geographic information system. We can then analyze spatial patterns of runoff and design variable-width buffers that precisely match the needs of every location along a waterway. Greater cost of precision conservation is offset partly by greater water-quality benefit from each acre of buffer. Many of the required data sources and modeling components already exist, substantial improvements are possible that can produce even greater conservation efficiency.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationDosskey, Mike G.; Eisenhauer, Dean E.; Helmers, Matthew J. 2005. Establishing conservation buffers using precision information. Journal of Soil and Water Conservation, Volume 60 Number 6: 349-354
KeywordsBuffer design, filter strip, precision agriculture, precision conservation, riparian buffer, water quality
- A design aid for sizing filter strips using buffer area ratio
- Placement of riparian forest buffers to improve water quality
- Methods to prioritize placement of riparian buffers for improved water quality
XML: View XML