Skip to Main Content
Cant, part volume little affected by sawing method, study showsAuthor(s): Peter Hamner; Marshall S. White; Philip A. Araman
Source: Pallet Enterprise. 25(5): 36-38
Publication Series: Miscellaneous Publication
PDF: View PDF (204.79 KB)
DescriptionThis article presents the results of a study conducted by the Pallet and Container Research Laboratory at Virginia Tech to investigate the impact of sawing pattern (straight vs. curve sawing) on lumber, cant, and pallet part yield from logs with varying degrees of sweep.
- You may send email to email@example.com to request a hard copy of this publication.
- (Please specify exactly which publication you are requesting and your mailing address.)
CitationHamner, Peter; White, Marshall S.; Araman, Philip A. 2005. Cant, part volume little affected by sawing method, study shows. Pallet Enterprise. 25(5): 36-38
- Power consumption and lumber yields for reduced-kerf circular saws cutting hardwoods
- The effect of sawbolt length on the yield of pallet materials from small-diameter hardwood trees
- The effect of curve sawing two-sided cants from small diameter hardwood sawlogs on lumber and pallet part yields
XML: View XML