Skip to Main Content
System 6 alternatives: an economic analysisAuthor(s): Bruce G. Hansen; Hugh W. Reynolds; Hugh W. Reynolds
Source: Res. Pap. NE-551. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 14 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
Download Publication (989.57 KB)
DescriptionThree System 6 mill-size alternatives were designed and evaluated to determine their overall economic potential for producing standard-size hardwood blanks. Internal rates of return ranged from about 15 to 35 percent after taxes. Cost per square foot of blanks ranged from about $0.88 to $1.19, depending on mill size and the amount of new investment required.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationHansen, Bruce G.; Reynolds, Hugh W. 1984. System 6 alternatives: an economic analysis. Res. Pap. NE-551. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 14 p.
KeywordsLow-grade hardwood utilization, blanks, dimension stock, investment analysis, discounted cash flow, internal rate of return
- Low-Cost Opportunity for Small-Scale Manufacture of Hardwood Blanks
- System 6: rough-mill operating manual
- Conventional Processing of Standard-Size Edge-Glued Blanks for Furniture and Cabinet Parts: a Feasibility Study
XML: View XML