Skip to Main Content
Long length cuttings from no. 2 common hardwood lumberAuthor(s): Edwin L. Lucas; Edwin L. Lucas
Source: Res. Pap. NE-248. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 5 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (422.61 KB)
DescriptionLong length cuttings (up to 60 inches) are obtainable in abundance from No. 2 Common oak lumber. Cutting for the maximum area of clear one face (ClF) parts 18 to 60 inches in length, we found that 46 percent of all the cuttings were 36 inches long or longer. The recovery of the long length cuttings did not reduce the overall yield of parts produced from the lumber. Computer simulation of conventional rough mill practices was based on a detailed analysis of 4,500 board feet of No. 2 Common oak lumber.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationLucas, Edwin L. 1973. Long length cuttings from no. 2 common hardwood lumber. Res. Pap. NE-248. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 5 p.
- Sustaining oak forests in eastern North America: regeneration and recruitment, the pillars of sustainability
- Cordwood Yields From Thinnings in Young Oak Stands in the Missouri Ozarks
- Oak Ecosystem Restoration and Maintenance in Southern Illinois
XML: View XML