Skip to Main Content
Construction-grade plywood from grade 3 Appalachian oakAuthor(s): E. Paul Craft; E. Paul Craft
Source: Res. Pap. NE-163. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 30 p.
Publication Series: Research Paper (RP)
Station: Northeastern Research Station
PDF: View PDF (2.44 MB)
DescriptionIn an effort to find a use for a large volume of the low-grade oak logs of Appalachia, we processed a sample of these logs in a typical southern-pine sheathing plant and determined the feasibility of converting them into construction grade plywood.
- Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat.
- During the capture process some typographical errors may occur.
- Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
CitationCraft, E. Paul. 1970. Construction-grade plywood from grade 3 Appalachian oak. Res. Pap. NE-163. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 30 p.
- Impact of elliptical shaped red oak logs on lumber grade and volume recovery
- Dimension Yields from Factory Grade 2 and 3 Red Oak Logs
- Mechanical grading of oak timbers
XML: View XML